Synchronous / Timing Belts – Megadyne

Isoran Classical Synchronous
Belts - Rubber Timing Belts

Isoran Classical Synchronous Belts (Rubber Timing Belts)

Rubber Timing Belts
These Rubber timing belts are available in both single as well as double sided teeth. These belts are manufactured using advanced technology.The Isoran belts combine the benefits of chain and gear along with that of V-belts and are devoid of the limitations usually associated with them. They are extremely versatile and therefore are applicable in a range of products and industries.

Specifications
& Properties

    The various features associated with the Synchronous belts include:

  • Minimal elongation
  • Synchronous transmission
  • High efficiency
  • Low noise transmission
  • Maintenance free
  • No need for lubrication
  • Constant as well as high angular speed
  • High fatigue resistant
  • Resistant to oil, heat and ozone

Product
Applications

    Due to its diverse features, the rubber timing belts can be used in a wide variety of applications:

  • Appliances
  • Carton Industry
  • Food Mixers
  • Wood Cutting Machines
  • Power Wheelchairs
  • Wood Cutting Machines
  • Cooling Systems
  • Flexible Packaging Systems
  • Paper Industry

Ranges Available:

Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm) Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm)
MXL 2.032 0.51 1.14 RPP3 3 1.15 2.40
XL 5.080 1.27 2.40 RPP5 5 2.00 3.80
L 9.525 1.91 3.60 RPP8 8 3.20 5.40
H 12.70 2.29 4.40 RPP14 14 6.00 9.70
XH 22.225 6.35 11.40 RPP5 DD 5 2.00 5.20
XXH 31.75 9.53 15.30 RPP8 DD 8 3.20 7.80
XLDD 5.08 1.27 3.05 RPP14 DD 14 5.70 14.00
LDD 9.525 1.91 4.60
HDD 12.70 2.29 5.90
Resistance To Standard Belt Resistance
Water Medium
Acids/Alkalis None
Solvents None
Mineral Oils Low
Oils Low
Greases Medium
Fuels None
Environmental Agents Medium
Other Features
Min: -250 C
Temperature Range Max: 80 C
Max Peak: 1000 C
Hardness 74 ± 4 Sh A

Silver / Gold / Platinum
Timing Belts

Rubber Timing Belts
These belts have been constructed using the highest quality materials. It is the bonded strength of the components together that ensures higher torque capacity.

ISORAN RPP Platinum:

The new PLATINUM is made with the most innovative materials of the highest quality. The extensive development andtests performed has resulted in the homogeneous integration of all the components, the cohesive bond of whichimparts superior load capacity to PLATINUM, providing to the users the maximum performance level nowadays available

FEATURES:

  • increased basic power capacity by up to 40% compared to the current RPP GOLD;
  • use of existing RPP pulleys, maintaining a full functional interchange with other deep pulleyprofile systems, like HTD, etc;
  • allows existing drives to be upgraded without the necessity to replace the pulleys, just thebelt itself;
  • reduction of noise by reduced belt widths due to the higher performance rating of the system;
  • low noise characteristics compared to drive systems using polyurethane, steel etc. due tothe rubber matrix and its teeth with the parabolic profile shape, recognized as the quietestsystem on the market;
  • a wide, continuous range of possible operating temperature, like no other system, whichmakes PLATINUM the only solution for extreme working conditions;
  • the highest belt tension and length stability;
  • longer drive lifetime due to the higher power capacity and flex fatigue resistance;
  • more compact and lightweight drives under the same power ratings;
  • exceptional resistance to abrasion and tooth shear under pulse loads;

ISORAN RPP Gold:

      MegadyneIsoran Gold belts have been developed to give a more powerful alternative to RPP and Silver belts to competeagainst high performance transmission systems using chains and gears, that always have a disadvantage in terms ofweight, noise, lubrication and maintenance costs.
    This belt is constructed with material of the best quality as well as strength. Since it is made from an innovative compound, there is increased resistance to tooth shearing- up to 15% than the previous belts. The main features of this belt include:

  • Glass fibre tensile members that are the load carrying element therefore there is better tension stability
  • Existing systems can be upgraded without the need to change pulleys.
  • Long life
  • Superior performance
  • Compact and lightweight
  • Resistant to abrasion
  • Noise reduction
  • Higher tooth shear resistance

ISORAN RPP Silver:

    It is an innovative and efficient power system and it offers great flexibility in transmission design because of increased performance. The belt body is formulated out of an innovative compound which offers a great level of flex fatigue resistance. Some of the important features of the belt include:

  • Upto 10% increase in load carrying capacity than the previous RPP Plus and 110% increase than Standard RPP
  • Makes use of existing RPP pulleys. Thus the existing systems can be upgraded without the need to change pulleys.
  • Noise Reduction
  • Superior tension stability during dynamic as well as static conditions
  • Increased flexibility
  • Maintenance free
  • Resistant to abrasion
  • Compact and lightweight

SPECIFICATIONS

Isoran Silver / Gold / Platinum belts have RPP profile, designed even to be interchangeable with existing deep grove profiles and run onpulleys according to ISO 13050.Isoran Silver& Gold belts are antistatic according to BS 2050

Range and Identification

Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm)
Temperature Range Other Properties
Min Max Max Peak Hardness Antistatic
SLV5 5 2.00 3.80
SLV8 8 3.20 5.40
SLV14 14 6.00 9.70
-250 C 80 C 100 C 90 ± 4 ShA According to BS2050
GLD8 8 3.20 5.40
GLD14 14 6.00 9.70
-25 C 80 C 100 C 90 ± 4 ShA According to BS2050
PLT8 8 3.20 5.40
PLT14 14 6.00 9.70
-35 C 115 C 130 C 90 ± 4 ShA Not Anti Static

Megapower / Megaflex PU
Endless timing belts

Megapower

8 Megapwer
MEGAPOWER timing belts are manufactured in thermoset polyurethane by a unique moulding process.The thermoset polyurethane gives superior wear andabrasion resistance. Several type of cords, helicallywound rolled up inside the belts, assure excellent dimensionalstability and offer high performances in terms offlexibility and traction resistance.

Specifications
& Properties

    Due to a number of features, Megapower performs to highest physical and chemical levels. Some of its features include:

  • High flexibility
  • Low noise
  • Low pre-tension
  • High resistance to abrasion
  • Low maintenance
  • Dimensional stability consistently
  • Linear speed up to 80 m/sec
  • Resistant to aging, Ozone, oil, UVA Rays and hydrolysis
  • Resistant to most alkalis and acids

Product
Applications

    MEGAPOWER belts are particularly suitable for power transmission applications

  • Light Synchronized and Stepped Drives
  • Office Equipment
  • Medical Equipment
  • Robotic Systems
  • Vending Equipment
  • Food Industry
  • Textile Industry
  • Leisure/ DIY equipment

Ranges Available: T2.5, T5, T10,
AT3, AT5, AT10,
DT5, DT10,
MXL, XL, L, H, XH

Megaflex

10 Megaflex
This type of belts are manufactured in polyurethane with spiral steel cords continuously. This type of belt offers good running characteristics and high traction loads. They are especially suited for power transmission and conveying withhigh loads and high speeds (up to 10.000 RPM).The addition of a nylon coating on the teeth during productionenhances the running properties for specific applications and reducesthe noise frictional coefficient.An extra thickness of special coating is also possible on the back of thebelt offering extra protection against aggressive or heavy products.
Megaflex belts are truly endless, enabling them to deliver exceptionalperformance.

Specifications
& Properties

    These belts have a nylon coating on the teeth which enhances the running properties. Some of the features of Megaflex include:

  • High flex cords
  • Nylon coating and additional special coating possible on the back of the belt
  • Endless to deliver exceptional performance
  • High traction load

Product
Applications

    Applications of this type of belt include:

  • Ceramic Industry
  • Marble and Stone Industry
  • Glass Industry
  • Heavy Transport Systems
  • Wood Industry
  • Food Grade Blue Belts

Ranges Available: MTD3, MTD5, MTD8, MTD14
RPP5, RPP8, RPP14
STD5, STD8

Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm) Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm) Dual Height (mm)
T2 2 0.50 1.10
T2.5 2.5 0.70 1.30 T2.5DL 2.5 0.70 1.30
T5 5 1.20 2.20 T5DL 5 1.20 2.20 3.4
T10 10 2.50 4.50 T10DL 10 2.50 4.50 7
T20 20 5.00 8.00 T20DL 20 5 8 13
AT3 3 1.10 1.90
AT5 5 1.2 2.7 AT5 DL 5 1.2 2.7 3.9
AT10 10 2.5 4.5 AT10 DL 10 2.5 4.5 7
AT20 20 5.00 8.00 AT20 DL 20 5.00 8.00 13
RPP5 5 2 3.8 RPP5 DL 5 2 3.8 5.2
RPP8 8 3.2 5.4 RPP8 DL 8 3.2 5.4 7.8
RPP14 14 6 10 RPP14 14 6 10 14.5
MTD3M 3 1.13 2.20
MTD5M 5 2.10 3.60
MTD8M 8 3.40 5.60
MTD14M 14 6.10 10.00
MXL 2.032 0.51 1.2
XL 5.080 1.25 2.25 XLDL 5.080 1.25 2.25 3.05
L 9.525 1.9 3.60 LDL 9.525 1.9 3.60 4.58
H 12.70 2.29 4.30 HDL 12.70 2.29 4.30 5.95
XH 22.225 6.35 11.2 XH 22.225 6.35 11.2 15.49

Megalinear Polyurethane
Timing Belts

image-for-megalinear-belts
These belts are wear and abrasion resistant because they are manufactured in thermoplastic polyurethane. Megalinear offers not just reliability but also exceptional dimensional stability.

Specifications
& Properties

    The running properties of the belt is enhanced sue to the nylon coating on the tooth or the back. It is also possible to add extra polyurethane at the back of the belt to offer better protection in case of aggressive or heavy products. Some of the key features offered by Megalinear include:

  • Low noise
  • Low pre-tension
  • Consistent dimensional stability
  • Low maintenance
  • High flexibility
  • Resistance to abrasion
  • Resistance to hydrolysis, Ozone, oils, aging and UVA rays
  • Resistance to alkalis and acids

Product
Applications

    The various applications of Megalinear include:

  • Conveyors
  • Automatic sliding doors
  • Elevators
  • Automated handling devices
  • Positioning systems
  • Serigraphic industry
  • Paper and carton industry
  • Textile for fiber winding
  • Chemical industry
  • Pharmaceuticals
  • Paper and carton industry

Ranges Available: : MXL-XL-L-H-XH
T2.5-T5-T10-T20
AT3-AT5-AT10-AT15-AT20

Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm) Pitch Pitch Length (mm) Teeth Height (mm) Belt Height (mm)
T2 2 0.50 1.10
T2.5 2.5 0.70 1.30 AT3 3 1.10 1.90
T5 5 1.20 2.20 AT5 5 1.2 2.7
T10 10 2.50 4.50 AT10 10 2.5 4.5
T20 20 5.00 8.00 AT20 20 5.00 8.00
MTD3M 3 1.13 2.20
RPP5 5 2 3.8 MTD5M 5 2.10 3.60
RPP8 8 3.2 5.4 MTD8M 8 3.40 5.60
RPP14 14 6 10 MTD14M 14 6.10 10.00
MXL 2.032 0.51 1.2
XL 5.080 1.25 2.25
L 9.525 1.9 3.60
H 12.70 2.29 4.30
XH 22.225 6.35 11.2

Special Timing
Belts

11 Special Belts
We hand craft belts to suit your application as per your requirement.
All these belts are manufactured by Blackbelt in the standard or the coated finish according to the specific requirements of the customer.They can be customized with welded-on profiles in order to meet the various requirements of your application. All these molded profiles produced by us are of the same urethane that are an integral part of all our other Blackbelt products.
Engineers at Blackbelt will work with clients to understand their requirement and thus design the profile matching to those requirements.

Specifications
& Properties

    Key properties of these belts include:

  • Can be molded to any custom configuration
  • Durable, non-marking construction of urethane
  • Fused thermally with the base belt material
  • Available with metal and threaded inserts

Product
Applications

    Some of the applications of this kind of belts include:

  • Elevators
  • Heavy load lifting
  • Metal stamping conveyors
  • Paper and wood conveying
  • Vacuum conveying belts
  • Precision movement
  • Feeder applications
  • Glass industry
  • Super grip
  • Sausage manufacturing
  • Packaging industry
  • Food and pharmaceuticals
  • Fragile and delicate material handling
  • Conveying unusual product shapes

Ranges Available: : Flat Belts, Special Coatings, Profiles Attachments