Rubber V Belts

V-Belts are an indispensable part of all and every industry. For decades V-belts have been used for Power Transmission applications due to its superiority over chains and etc. It is a very critical part, that sets the entire Industry in motion.

Wrapped Belts

01A Wrapped Belt Image
01A Wrapped Belt Image2
Wrapped belts are one of the most common belts and are used extensively in a number of applications. They provide the right dimensional precision making them suitable for multiple transmissions. Even after use, the dimensional stability remains intact. Blackbelt wrapped belts are manufactured according to the industry standards and adhere to the regulations. At Blackbelt, all your specifications are met as our technical staff strives to provide you the best in wrapped belt technology. Since a variety of wrapped belt sizes are available, it becomes possible to use them in a range of applications.

& Properties

There are many feature associated with these kinds of belts which make them a popular choice. Blackbelt Wrapped belts are manufactured in accordance with ISO 418, DIN 2215, BS 3790, ANSI/RMA IP-20.

  • High efficiency with low maintenance
  • Smooth running
  • Wide variety of horsepower ranges
  • Easy installation
  • Wide range of driven sheep
  • Heat and oil resistant
  • Has antistatic properties


  • Industrial Washing Machines
  • Machine Tools
  • Lathe Machines
  • Generators
  • Stone Crushers
  • Printing Press
  • Kneading Machines
  • Fans and Pumps
  • Printing Press

Ranges Available:Z, M, A, B, C, D, E

Section Top Width Height Angle Length Range (Li)
In 1/10 inches In mm
Z/10 10 6 40 15-72 380-1830
A/13 13 8 40 17-280 430-7110
B/17 17 11 40 20-520 510-13200
C/22 22 14 40 41-520 1040-13200
D/32 32 19 40 95-520 2415-13200
E/40 38 24 40 160-520 4065-13200

Wedge Belts

01b wedge belt
Due to the ever evolving nature of machinery, new compact machineries have been introduced which require high power transmission. This was made possible by the introduction of the narrow wedge belts which are nothing but a modification of the classic V-belts, offering high power transmission capacity. Blackbelt Wedge belts have precision built qualities and confirm to the industry standards.

Specifications: Wedge Belts manufactured by Blackbelt are in accordance with ISO 4164, DN 7753, BS 3790, RMA/MPTA IP-22.


  • Higher power than classical belt
  • Resistant to oil, ozone and abrasion
  • High grade rubber
  • No maintenance
  • Highly durable and wear resistant


  • Compact high power drives
  • Hammer Mills
  • Lifters
  • Piston Compressors
  • Dredging Pumps
  • Paper Machines
  • Textile Machines
  • Heavy Load Conveyor Belts
  • Riffing Saw
Section Top Width Height Angle Length Range (Li)
In 1/10 inches In mm
SPZ 9.7 8 40 250-2180 550-5540
SPA 12.7 10 40 280-2100 730-5330
SPB 16.3 13 40 480-6300 1210-16000
SPC 22 18 40 740-6300 1860-16000
3V 9.5 8 40 920-6300 2335-16000
5V 16 13.5 40 920-6300 2335-16000
8V 25 22 40 920-6300 2335-16000


Fractional Horsepower Belts are a part of the classic V-Belts and are light duty belts. As the name implies, these belts are apt for drives of 1hp or less. Thanks to theFHP belts by Blackbelt, you no longer need to put up with low energy efficient envelope belts. The cutting-edge construction of these belts provides exceptional performance.

& Properties

      FHP drives have historically been inefficient mainly due to the large envelope belts which have been unable to transmit low power force efficiently. Thus

Blackbelt’s FHP belts have been constructed in a manner to boost efficiency and improve performance.

  • Energy efficient
  • Low vibration and low noise
  • Long life
  • Maximum tension control
  • Minimum heat build-up
  • Resistant to heat, oil, ozone and abrasion
  • Static conductive
  • Reduced energy requirement


  • Light Machinery
  • Home appliances
  • Blowers
  • Farm Machinery
  • Shop Equipment

Ranges Available:3L, 4L, 5L


Section Top Width Height Angle Length Range (Li)
In inches In mm
3L 10 5.5 40 15-60 380-1525
4L 13 8 40 17-100 430-2540
5L 17 10 40 23-1000 585-2540

RE Belts

01D Raw Edge Cogged Belt
The use of these belts is rampant in light and heavy industrial applications. Being cogged, they provide better flexibility and thus lets it bend easily over shaves. This helps in energy saving and helps in low heat buildup. These belts manufactured by Blackbelt have very high power transmission capacity.

Specifications: The Blackbelt REC belts are manufactured in accordance withISO 4184, DIN 2215, BS 3790, ANSI/RMA IP-20.


    The key features of this kind of belts include:

  • High ambient temperature
  • High speed of the belt
  • Molded Cogs
  • Tough and tensile member that provides better strength
  • Oil and heat resistant
  • Antistatic


  • High Speed Compact Drives
  • High Speed Dissipation
  • High Flexibility Appliances

Ranges Available: : ZX, AX, BX, CX


Section Top Width Height Angle Length Range (Li)
In inches (Li) In mm (Li)
ZX/10 10 6 40 19-197 485-5000
AX/13X 13 9 40 19-197 485-5000
BX/17X 17 11 40 23-197 585-5000
CX/22X 22 14 40 42-197 1065-5000
In 1/10 inches (La) In mm (Lw)
XPZ / 3VX 10 6 40 220-1390 562-3550
XPA 13 9 40 590-4000
XPB / 5VX 17 11 40 370-2560 950-6500
XPC 22 14 40 2000-7100

Hexagonal / Double Belts

01G Hexagonal belt 1
01G Hexagonal belt 2
There are many special characteristics of this kind of belt. It is primarily used on drives which have one or more reverse bends and where the power has to be transmitted to and from the belt in the usual as well as reverse position.

& Properties

    Some of the key properties and features of the Hexagonal belts include:

  • Dual sided classical profile
  • High strength members
  • Oil, heat and Ozone resistant
  • Abrasion resistant
  • Fire resistant


    Some of the applications of Hexagonal belts include:

  • Lawn and Garden Equipment
  • Conveyors
  • Mixers
  • Agitators
  • Agricultural Machines
  • Textile Industry
  • Mule Drivers
  • Crushers

Ranges Available: : AA, BB, CC, 25×20


Section Top Width Height Angle Length Range (Li)
In inches In mm
AA 12.5 10.3 40 50-140 1270-3550
BB 16.5 13.5 40 60-250 1525-6350
CC 22 18 40 132-300 3350-7620

Banded Belts

These belts specially prevent rollover as well as vibration tendencies because of being banded and having joint construction. These belts are ideally used where belt vibration or belt whip can be detrimental to the results. Blackbelt has especially created Banded belts which offer great degree of flexibility.One of the high points of Blackbelt Banded belts is that it offers enhanced power transmission capacity.

& Properties

    Some of the properties associated with banded belts have made possible to use it extensively in industries where the conventional multiple V-belts have not yielded satisfactory results. Some of the key features of this kind of belt include:

  • High degree of design flexibility
  • Joined construction
  • Antistatic
  • Oil, heat and Ozone resistant
  • Resistant to Abrasion
  • Touch backing of fabric
  • Highly efficient


  • Mining
  • Stone Crushers
  • Vertical Shaft Drives
  • Clutching Drives
  • Concrete Manufacturing Units
  • High Power Mills
  • Marine and Agriculture Pumps
  • Compressors
  • Dredgers
  • Industrial Blowers

Ranges Available: RA, RB, RC, RD
R3V, R5V, R8V

Automotive Belts

Automotive Belts

Automotive belts by Blackbelts are designed to guarantee outstanding reliability and provide a long service life, even after enduring considerable strain. Automotive belts come in a number of types with different properties and key features governing them.These belts are designed with some of the best components in the market applying the latest technology.


The AVX belt by Blackbelt is the most advanced belt with new process and structure specifically designed for heavy duty transportations such as trucks, busses, and off road equipment. The belts produced by Blackbelt make use of specific rubber mixture which are able to endure increased pressure as well as high temperature. The belts are angled cut which gives a better engagement with Pulley and equipped with Special Bottom Fabric which maintains the Stretch and Crack resistance and provides stability to the formation in the event of Shock Loads.

Specifications & Properties

    Some of the properties of AVX belts include:

  • Smoother and quieter running
  • Specially made for Heavy and long use applications.
  • Heat dissipation
  • 30% longer life
  • Resistance to oil and heat

Ranges Available: Rages Available: AVX 10, AVX 13


Blackbelt produced high quality Raw Edge Laminated (REL) belts that are used extensively in automotive industry. One of the highlights of these kinds of belts produced by Blackbelt is the presence of hi-modulus, polyester cord in the mid-section of the belt that is specifically designed to maintain extreme belt loads and shock without stretching.

& Properties

    Some of the properties of this belt include:

  • Increased efficiency
  • Longer life
  • High wear resistance
  • Excellent resistance to oil, heat and abrasion
  • Excellent tension behavior


  • Automotive Industry- IC Engines, water pump, cooling pump alternator, compressor
  • Agriculture Industry

Ranges Available: FM, FA, FB


The BLACKBELT RIB belts are made by EPDM material, a Rubber which features Low Pollution, better durability, higher Heat Resistance, Longevity than traditional CR belts.
The components used for the manufacturing of Automotive Ribbed belts is of premium quality made with leading technology.

& Properties

    Some of the main features of this kind of belts include:

  • Resistance to oil and ozone
  • Maintenance free
  • Rib crack resistant
  • Low noise
  • Minimal Belt Slipage
  • Low stretch and high resistance to wear
  • Optimum High / Low Temperature Resistance
  • High load carrying capacity at higher tensions
  • Increased stability of the belt

Ranges Available: 3PK-12PK

Whatsapp Now